Mini-Terminal ADuC7020 ARM

Carrier board for the ADuC7020 ARM processor.

• MCU: ADuC7020 - ARM7TDMI Core, 16/32-bit RISC architecture, 5 Channels 12-bit, 1MSPS ADC, Differential and single-ended modes, 0 to Vref Analog Input Range, 4 Outputs 12-bit Voltage Output DACs, On-Chip 20ppm/°C Voltage Reference, On-Chip Temperature Sensor (±3°C), Uncommitted Voltage Comparator, JTAG Port, Clocking options: Trimmed On-Chip Oscillator (± 2%), External Watch crystal, External clock source, 45MHz PLL with Programmable Divider, 62k Bytes Flash/EE Memory, 8k Bytes SRAM, In-Circuit Download, JTAG based Debug, Software triggered in-circuit re-programmability, UART, dual I2C and SPI Serial I/O, 14-Pin GPIO Port, 2 X General Purpose Timers, Wake-up and Watchdog Timers, Power Supply Monitor, PLA – Programmable Logic (Array), Power Specified for 3V operation, Active Mode: 6mW (@1MHz) 300mW (@45MHz), Fully specified for –40°C to 85°C operation;
• JTAG connector for in-circuit programming and debugging with ARM-JTAG
• USB-RS232 convertor and interface to ADuC7020, can be used for serial download
• I2C connector
• Reset supervisor IC and button
• Serial Download (bootloader enable) button
• Two buttons
• LCD 16x2 display with BACKLIGHT
• 32.768kHz oscillator crystal
• Power supply filtering capacitor and ferite bead
• Extension header for ADC and DAC ports
• PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print

Dimensions: 1.45x3.8" (37x97 mm)

Documents: ADuC-MT7020 Schematic