Arduino Compatible 8MHZ Breadboard Kit
This kit has all the components to build an Arduino compatible stand-alone on a breadboard (we even supply the breadboard), all you need to program the chip is an FTDI board or Arduino board. You will also need a regulated 3.3V to 5.5V power supply to run it stand alone, this can be batteries, or a ‘Wall Wart’ Type Power adaptor.
You can also use these parts to build a stand-alone project on vero strip board.
Please note, you will need to supply your own jumper wire to complete the wiring of this kit.
The ATMEGA328 is installed with the Arduino Pro Mini bootloader @ 8MHz – Select ‘Arduino Pro or Pro Mini (3.3V. 8MHz) w/ ATmega328 from the Tools/Board menu on the Arduino IDE.
- PPARDBBKIT (Instructions)
PLEASE NOTE – JUST IGNORE THE CRYSTAL & CAPACITORS MARKED 220 (22pF) REFERRED TO IN THE INSTRUCTIONS WHEN ASSEMBLING as this kit uses the internal oscillator for the ATMEGA328