Polymer Lithium-Ion Lipo Battery, 3.7V, 2000mAh, 2Ah
These 3.7V Polymer Lithium-Ion (LiPo) batteries provide a high power capacity in a very small lightweight package. This makes them ideal for many applications. They are often used in portable consumer products such as Bluetooth speakers and mobile phones.
Comes terminated with a standard 2-pin JST-PH connector – 2mm spacing between pins.
These batteries require special charging. Do not attempt to charge these with anything but a specialized Lithium Polymer charger.
The batteries are supplied with 100mm leads terminated with a standard 2 pin JST-PHR-2PIN connector.
These Polymer Lithium batteries come with a built-in protection circuit that protects against; over-voltage, over-current, and over-discharge.
These batteries do not have a hard protective case. You should take care when housing the batteries in your design to ensure they have sufficient mechanical protection to protect the battery from any possible damage. If a battery does become damaged (dented, bent, etc) then it should not be used.
Be aware that the polarity of these batteries may not match your application. Please be sure to check polarity before connecting the battery. In addition to being unsafe – your circuit could be damaged beyond repair.
This is a very beefy battery, please only use it if you know what you are doing, please don’t use it in a wearables project and short circuits could cause a fire.
2000mAh Battery Features:
- Built-in protection circuit to prevent over-charging or discharging.
- Rated Capacity: 2000mAh
- Nominal Voltage: 3.70V
- 1 x Polymer Lithium-Ion Battery – 2000mAh.
2000mAh Battery Dimensions:
- Maximum length: 69mm
- Maximum width: 50mm
- Maximum height: 5.6mm
- Cable length: 100mm (nominal)