SparkFun PRT-13157 Breadboard Power Supply Stick – 3.3V/1.8V
This is a very simple Breadboard Power Supply Stick that takes a 4-9V input voltage and outputs a selectable 1.8V or 3.3V regulated voltage. All headers are 0.1″ pitch for simple insertion into a breadboard.
Input power can be supplied to either the DC barrel jack or the two pin header labeled + and -. Output power is supplied to the pins labeled GND and VCC. Board has both an On/Off switch and a voltage select switch (3.3V/1.8V).
The two sets of four GND and VCC pins are spaced such that when connected to our Basic Breadboard both power buses will be powered.
Note: Headers are not supplied. You will need to supply your own headers to connect this board to a breadboard. Check below for some breakaway header strips.
Breadboard Power supply stick Features:
- 6-12V input voltage via barrel jack or 2-pin header
- 3.3V or 5V regulated output voltage
- 800mA Operating Current
- ON/OFF switch
- Output voltage select switch
- Power status LED
- PTC fuse protected power
- 5.5×2.1mm center positive barrel jack
Proto-PIC pride ourselves on top notch customer service and after sales support. If you have any questions relating to a product,order status or technical support, head on over to our Contact page.
Check out our YouTube Channel and discover a range of interesting video tutorials, we hope these will give you some inspiration to start a new project and expand your skills!