SparkFun SEN-11028 Triple Axis Accelerometer and Gyro Breakout – MPU-6050

(1 customer review)

£21.88 inc VAT

Availability: 3 in stock (can be backordered)

Brand: SparkFun
Part Number: SEN-11028
SKU: PPSEN-11028
Barcode: 5055421028695

SparkFun SEN-11028 Triple Axis Accelerometer and Gyro Breakout – MPU-6050

The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on discrete parts.

Our breakout board for the MPU-6050 makes this tiny QFN package easy to work into your project. Every pin you need to get up and running is broken out to 0.1″ headers, including the auxiliary master I2C bus which allows the MPU-6050 to access external magnetometers and other sensors (Tie these to Voltage Input with resistors 4.7K to 10K if not used – failure to do so will stop the sensor from working correctly).

Having a hard time picking an IMU? Our Accelerometer, Gyro, and IMU Buying Guide might help!

Dimensions: 1 x 0.6 x 0.09″ (25.5 x 15.2 x 2.48mm)


  • I2C Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format
  • Input Voltage: 2.3 – 3.4V
  • Selectable Solder Jumpers on CLK, FSYNC and AD0
  • Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
  • Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
  • Digital Motion Processing™ (DMP™) engine offloads complex MotionFusion, sensor timing synchronization and gesture detection
  • Embedded algorithms for run-time bias and compass calibration. No user intervention required
  • Digital-output temperature sensor


1 review for SparkFun SEN-11028 Triple Axis Accelerometer and Gyro Breakout – MPU-6050

  1. Chris, Lum

    Very handy little dev board as it would take super human skill to solder the MPU6050 chip by hand. Only drawback is not having a solder link to tie VLogic (labled VIO on the PCB) to Vdd, which is required by the device to operate correctly but that was fi

Add a review
Scroll to Top