Build Tutorials and Resources

Arduino Click Case for Uno R3 by Proto-PIC

Click Case for Arduino Uno R3 by Proto-PIC

Click Case for Arduino Uno R3 by Proto-PIC We’ve designed this case to protect your Arduino Uno R3, while still allowing full access to pins, ports, processor and pusher (reset button)! To make it easier to assemble we’ve also removed

Uno R3 Arduino Clone - Proto-PIC main image

UNO R3 Clone Compatible with Arduino

UNO R3 Clone Compatible with Arduino This UNO R3 clone is fully compatible with the Arduino IDE, and all shields designed for the Arduino UNO R3 and earlier. The pin out is the same as the official Arduino UNO R3,

Breadboard Shield for Arduino Uno R3 Single

Breadboard Shield for Arduino Uno R3 Single

Breadboard Shield for Arduino Uno R3 Single The Breadboard shield has the same pattern as a half size breadboard, there are power connections running down the center for ease of connecting up your designs. This allows you to easily move

Arduino UNO Project Starter Kit

Arduino UNO Project Starter Kit

The Arduino UNO Compatible Project Starter Kit offers excellent value for money, containing and Arduino compatible Uno and a multitude of sensors, breakout boards and components all housed in a 2 tier plastic project container it has enough parts to

ATmega328 with Arduino Optiboot (Uno)

ATmega328 with Arduino Optiboot (Uno)

ATmega328 with Arduino Optiboot (Uno) The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without

Proto Shield Kit for Arduino Uno (DEV-13820)

Proto Shield Kit for Arduino Uno (DEV-13820)

Proto Shield Kit for Arduino Uno – Sparkfun DEV-13820 The SparkFun ProtoShield Kit lets you customize your own Arduino shield using whatever circuit you can come up with and then test it to make sure everything is working the way

Sparkfun OpenLog Datalogger Kit Qwiic Main

OpenLog Datalogger Kit, Qwiic (KIT-18350)

Qwiic OpenLog Kit – Sparkfun KIT-18350 The SparkFun Qwiic OpenLog Kit includes everything you’ll need to get up and running with the Qwiic OpenLog and the Qwiic Ecosystem. Inside the kit you will find a SparkFun RedBoard Qwiic, a Qwiic

SparkFun DEV-15123 RedBoard Qwiic

SparkFun DEV-15123 RedBoard Qwiic

SparkFun DEV-15123 RedBoard Qwiic The SparkFun RedBoard Qwiic is an Arduino-compatible development board that uses a few of the features that we have loved about Arduinos of the past while also incorporating a few key improvements over the original RedBoard.

RedBoard - Programmed with Arduino - SparkFun DEV-13975

RedBoard – Programmed with Arduino (DEV-13975)

RedBoard – Programmed with Arduino – SparkFun DEV-13975 We use many Arduinos and we’re always looking for the simplest, most stable one. Each board is a bit different and no one board has everything we want, so we decided to

Arduino Pro 328, 5V, 16MHz (DEV-10915)

Arduino Pro 328, 5V, 16MHz (DEV-10915)

Arduino Pro 328, 5V, 16MHz – SparkFun DEV-10915 It’s blue! It’s skinny! It’s the Arduino Pro! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader in a super-sleek form factor that will fit easily

Arduino Pro Mini 328 - 5V 16MHz (DEV-11113)

Arduino Pro Mini 328 – 5V 16MHz (DEV-11113)

Arduino Pro Mini 328 – 5V 16MHz – SparkFun DEV-11113 It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come

Arduino Pro Mini 328 - 3.3V/8MHz

Arduino Pro Mini 328 – 3.3V/8MHz (DEV-11114)

Arduino Pro Mini 328 – 3.3V/8MHz – SparkFun DEV-11114 It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with

Zumo Robot v1.2

Zumo Robot for Arduino, v1.2 (Assembled with 75:1 HP Motors)

Zumo Robot for Arduino, v1.2 (Assembled with 75:1 HP Motors) The Pololu Zumo robot is an Arduino-controllable tracked robot platform that is less than 10 cm × 10 cm—small enough to qualify for Mini Sumo. It includes two micro metal gearmotors coupled to a

EasyVR 3 Plus Shield for Arduino (COM-15453)

EasyVR 3 Plus Shield for Arduino (COM-15453)

EasyVR 3 Plus Shield for Arduino – SparkFun COM-15453 Do you make time to talk to your Arduino? Maybe you should! The EasyVR 3 Plus Shield is a voice recognition shield for Arduino boards integrating an EasyVR module. This kit

Scroll to Top