Description
Nut - Metal (4-40, 10 pack)
We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and is handpicked only at the peak of the season. Or how they are expertly hand-ground by a 6th generation master grinder. And how every nut passes a rigorous 19-point inspection process at each step of the process. And how each nut’s dimensional variations can only be measured on the sub-atomic level.
We could say all that, but it would be a lie. These are standard 4-40 zinc-plated nuts.
Supplied in packs of 10
Related Products
Nylon Nut - 4-40 (pack of 10)
Sparkfun
£1.61
Nylon Nut - 4-40 (pack of 10) - Discontinued
Sometimes you need to fasten something down with a nut, but don’t want to worry about shorting anything.A nylon nut can save you the risk of shorting out...
Metal Hex Standoff - 4-40, 3/8" (pack of 10)
Sparkfun
£4.00
Metal Hex Standoff - 4-40, 3/8" (pack of 10)
Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length.They can be stacked to create any length. The sky is the...
Screws, Phillips Head, 3/4", 4-40 (10 pack)
Sparkfun
£1.50
Screws, Phillips Head, 3/4", 4-40 (10 pack)
Standard Philips-head 4-40 screws. They are ¾" long and come in packs of ten.This is the screw size used in most of the holes for our breakout boards.
Standoff, Nylon, 4-40, 3/8" (10 pack)
Sparkfun
£3.30
Standoff, Nylon, 4-40, 3/8" (10 pack)
These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table.The...
Plastic Standoff - 4-40, 3/8" (pack of 10)
Sparkfun
£3.30
Plastic Standoff - 4-40, 3/8" (pack of 10)These nylon standoffs are 3/8" long and tapped for a 4-40 screw.These are great for mounting your board in an enclosure or just getting it up off the table.
Screw - Phillips Head, 1/2", 4-40 (10 pack)
Sparkfun
£1.60
Screw - Phillips Head, 1/2", 4-40 (10 pack) - SparkFun PRT-10452
These Philips-head 4-40 screws,
Screw - Phillips Head, 1/4", 4-40, 10 pack (PRT-10453)
Sparkfun
£1.35
Screw - Phillips Head, 1/4", 4-40, 10 pack - SparkFun PRT-10453
There are your standard Philips-head 4-40 screws.They are ¼" long and come in packs of ten.This is the screw size we use in most of the...
M3 10mm panhead pozidriv machine screws and dome nuts 4 pack
Proto-PIC
£1.20
M3 10mm panhead pozidriv machine screws and dome nuts 4 pack
These are high quality stainless steel M3 10mm pan head pozidriv machine screws and M3 dome nuts.Kit contains:
4 x M3 10mm machine...
Machine Screw: #4-40, 1/2" Length, Phillips (25-pack)
Pololu
£1.80
Machine Screw: #4-40, 1/2" Length, Phillips (25-pack)
This is a 25 pack of zinc-plated, steel, 1/2" long, 4-40, pan-head screws.