Beaglebone
Beaglebone Development Boards
Beaglebone development boards are a platform for developers and hobbyists supported by a vast community. Getting started on development takes less than 5 minutes and these low-cost development boards Boot up Linux in under 10 seconds!
Beaglebone Boards:
| PocketBeagle | BeagleBone Black | BeagleBone Blue | BeagleBone AI | |
| Processor | AM3358 | AM3358 | AM3358 | AM5729 |
| ARM Cortex-A8 | ARM Cortex-A8 | ARM Cortex-A8 | 2x ARM Cortex-A15 | |
| Maximum Processor Speed | 1GHz | 1GHz | 1GHz | 1.5GHz |
| Co-processors | 2x200-MHz PRUs, ARM Cortex-M3, SGX PowerVR | 2x200-MHz PRUs, ARM Cortex-M3, SGX PowerVR | 2x200-MHz PRUs, ARM Cortex-M3, SGX PowerVR | 4x200-MHz PRUs, 2x ARM Cortex-M4, 2x SGX PowerVR, 2x HD video |
| Analog Pins | 2 (3.3V), 6 (1.8V) | 7 (1.8V) | 4 (1.8V) | 7 (3.3V) |
| Digital Pins | 44 (3.3V) | 65 (3.3V) | 24 (3.3V) | 72 (3.3V) (7 shared with analog) |
| Memory | 512MB DDR3 (800MHz x 16), microSD card slot | 512MB DDR3 (800MHz x 16), 4GB on-board storage using eMMC, microSD card slot | 512MB DDR3 (800MHz x 16), 4GB on-board storage using eMMC, microSD card slot | 1GB DDR3 (2x 512Mx16, dual-channel), 16GB on-board storage using eMMC, microSD card slot |
| USB | USB 2.0 480Mbps Host/Client Port, USB 2.0 on expansion header | USB 2.0 480Mbps Host/Client Port, USB 2.0 Host Port | USB 2.0 480Mbps Host/Client Port, USB 2.0 Host Port | USB 3.0 5Gbps Host/Client Port, USB 2.0 Host Port |
| Network | add-ons | 10/100 Ethernet | 2.4GHz WiFi, Bluetooth, BLE | Gigabit Ethernet, 2.4/5GHz WiFi, Bluetooth, BLE |
| Video | SPI displays | microHDMI, cape add-ons | SPI displays | microHDMI, cape add-ons |
| Audio | add-ons | microHDMI, cape add-ons | add-ons, Bluetooth | microHDMI, Bluetooth, cape add-ons |
| Supported Expansion Interfaces | 3x UART, 4x PWM, 2x SPI, 2x I2C, 8x A/D converter, 2x CAN bus (w/o PHY), 2x quadrature encoder, USB | 4x UART, 12x PWM/Timers, 2x SPI, 2x I2C, 7x A/D converter, 2x CAN bus (w/o PHY), LCD, 3x quadrature encoder, SD/MMC, GPMC | 4x UART, 2-cell LiPo, 2x SPI, I2C, 4x A/D converter, CAN bus (w/ PHY), 8x 6V servo motor, 4x DC motor, 4x quadrature encoder | 4x UART, 12x PWM/Timers, 2x SPI, 2x I2C, 7x A/D converter, CAN bus (w/o PHY), LCD, 3x quadrature encoder, SD/MMC |
| On-board Sensors | - | - | 10 degree of freedom IMU (accelerometer, gyroscope, magnetometer, thermometer), barometer/thermometer | on-die temperature |
There are no products listed under this category.