Mounts and Hubs
Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.
These parts let you support moving components, interface various structural components, and are the basic building blocks to connecting all Actobotics products together. All hubs and mounts use a unique yet universal hole pattern which allows all the various components to connect together in a variety of configurations.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Adjustable Laser Mounting Stand (1055)
AdaFruit
£9.60Adjustable Laser Mounting Stand - Adafruit 1055 Use this nice adjustable laser mount to attach any of our laser diode modules to your desk, robot, shark, etc.A set-screw holds the laser in place. You can then adjust the tilt. Has a flat mounting plate...£9.60 -
Stamped Aluminum L-Bracket Pair for Plastic Gearmotors
£4.25Stamped Aluminum L-Bracket Pair for Plastic Gearmotors These light-weight L-Brackets for Plastic Gearmotors (approximately 2 or 2.5g each) are specifically designed for the larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1...£4.25 -
SparkFun COM-13013 Mini Microswitch - SPDT (Lever, 2-pack)
Sparkfun
£3.50SparkFun COM-13013 Mini Microswitch - SPDT (Lever, 2-pack) This is a 3-terminal microswitch two pack, each equipped with a 17mm lever actuator. These switches have a great ‘clicky’ sound to them with a nice tactile feel and are perfect when...£3.50 -
SparkFun ROB-12443 Servo Hub - Standard (Hitec Standard)
Sparkfun
£5.00SparkFun ROB-12443 Servo Hub - Standard (Hitec Standard) These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your C1 Hitec servo spline. These aluminum servo hubs have a diameter of 1 , a width of 0.25 , and...£5.00 -
Stepper Motor Mount - NEMA 17 (ROB-12987)
Sparkfun
£8.04Stepper Motor Mount - NEMA 17 - SparkFun ROB-12987 The NEMA 17 Stepper Motor Mount connects to the topside of a stepper motor to make integrating it into your Actobotics project even easier. Thanks to the 0.77" hub pattern this stepper motor mount...£8.04 -
Aluminium Scooter Wheel Adapter for 6mm Shaft
Pololu
£5.90Aluminium Scooter Wheel Adapter for 6mm Shaft - Pololu 2674 This two-part aluminium assembly mounts directly to 6 mm diameter motor output shafts like those on our 37D mm gearmotors and allows you to drive most scooter, skateboard, inline...£5.90 -
Mounting Bracket for Glideforce Industrial-Duty Linear Actuators - Aluminum
Pololu
£54.00Mounting Bracket for Glideforce Industrial-Duty Linear Actuators - Aluminum This mounting bracket was designed specifically for the Glideforce Industrial-Duty (ID) linear actuators.It is machined out of a single piece of aluminum and has been tested to...£54.00Qty in Cart: 0Price:£54.00Subtotal: -
Machined Aluminium Bracket for 37D Metal Gearmotors
Pololu
£8.50Machined Aluminium Bracket for 37D Metal Gearmotors These Machined Aluminium Brackets for 37D Metal Gearmotors allow you to mount and fix your gearmotor to a surface or project! The brackets have been designed so the six mounting holes of the 37D...£8.50 -
Steel L-Bracket for NEMA 23 57mm Stepper Motors
Pololu
£6.00Steel L-Bracket for NEMA 23 57mm Stepper Motors - Pololu 2258 This steel L-Bracket for NEMA 23-size motors is made from 3mm-thick coated steel, weighing in at 160 grams. Despite being specifically designed for the faceplate of the NEMA 23 stepper motors,...£6.00 -
Stamped Aluminum L-Bracket for NEMA 14 Stepper Motors
Pololu
£4.00Pololu's Stamped Aluminum L-Bracket for NEMA 14 Stepper Motors is sturdy yet lightweight (around 7.5g) and is made from 2mm black anodized aluminium. Designed specifically for the faceplate of NEMA 14 stepper motors. The bracket allows for 2mm of...£4.00 -
Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors
Pololu
£4.50Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors Pololu's Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors is sturdy yet lightweight (around 15g) and is made from 3mm black anodized aluminium. Designed specifically for the faceplate of NEMA 17...£4.50