Leads and Brackets
Leads and Brackets for Motors and Actuators
Its really important when adding a motor or actuator to your project that it is securely fixed in place. There is nothing worse when trying to create an automated masterpiece than having a floppy actuator.
Proto-Pic have a range of clamps and brackets for our motors that will allow you to ensure a secure mounting.
Slip Rings allow you to get electrical signals through something that is rotating.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Stamped Aluminum L-Bracket Pair for Plastic Gearmotors
£4.25Stamped Aluminum L-Bracket Pair for Plastic Gearmotors These light-weight L-Brackets for Plastic Gearmotors (approximately 2 or 2.5g each) are specifically designed for the larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1...£4.25 -
Servo Extension Leads / Cables
£2.00 - £3.50Servo Extension Leads / Cables These are servo extension cables. They comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with...£2.00 - £3.50 -
Stepper Motor Mount - NEMA 17 (ROB-12987)
Sparkfun
£8.04Stepper Motor Mount - NEMA 17 - SparkFun ROB-12987 The NEMA 17 Stepper Motor Mount connects to the topside of a stepper motor to make integrating it into your Actobotics project even easier. Thanks to the 0.77" hub pattern this stepper motor mount...£8.04 -
Metal L-Bracket for 37D mm Metal Gearmotor Bracket (2-Pack)
Pololu
£10.0037D mm Metal Gearmotor Bracket - Pololu 1084 These aluminium L-brackets let you securely mount Pololu’s 37D mm metal gearmotors to your project. Each bracket includes six M3 screws for securing the motor to the bracket. Each bracket also features...£10.00Qty in Cart: 0Price:£10.00Subtotal: -
Pololu Micro Metal Gearmotor Bracket Pair - White
Pololu
£2.50Pololu Micro Metal Gearmotor Bracket Pair - White These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm x 12 mm x 26 mm metal gearhead motors first popularized by Sanyo’s 12GN series (e.g. NA1S…NA3S),...£2.50 -
Pololu Micro Metal Gearmotor Bracket Extended Pair
Pololu
£4.80Pololu Micro Metal Gearmotor Bracket Extended Pair These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm x 12 mm x 26 mm metal gearhead motors first popularized by Sanyo’s 12GN series (e.g. NA1S…NA3S),...£4.80 -
Mounting Bracket for LD Linear Actuators
Pololu
£24.00Mounting Bracket for LD Linear Actuators These brackets come with all the hardware you need to attach linear actuators to a frame or chassis. Two brackets are required for each linear actuator.£24.00 -
Pololu Micro Metal Gearmotor Bracket Pair - Black
Pololu
£4.00Pololu Micro Metal Gearmotor Bracket Pair - Black These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm x 12 mm x 26 mm metal gearhead motors first popularized by Sanyo’s 12GN series (e.g. NA1S…NA3S),...£4.00 -
Universal DC Motor Mounting Bracket
Proto-PIC
£1.00Universal DC Motor Mounting Bracket Behold the Universal DC Motor Mounting Bracket for fixing motors to any surface! The Self-adhesive base allows quick installation, plus 4 screw holes to enable permanent fixing. Fits all mini DC motors...£1.00 -
Machined Aluminium Bracket for 37D Metal Gearmotors
Pololu
£8.50Machined Aluminium Bracket for 37D Metal Gearmotors These Machined Aluminium Brackets for 37D Metal Gearmotors allow you to mount and fix your gearmotor to a surface or project! The brackets have been designed so the six mounting holes of the 37D...£8.50 -
Steel L-Bracket for NEMA 23 57mm Stepper Motors
Pololu
£6.00Steel L-Bracket for NEMA 23 57mm Stepper Motors - Pololu 2258 This steel L-Bracket for NEMA 23-size motors is made from 3mm-thick coated steel, weighing in at 160 grams. Despite being specifically designed for the faceplate of the NEMA 23 stepper motors,...£6.00 -
Stamped Aluminum L-Bracket for NEMA 14 Stepper Motors
Pololu
£4.00Pololu's Stamped Aluminum L-Bracket for NEMA 14 Stepper Motors is sturdy yet lightweight (around 7.5g) and is made from 2mm black anodized aluminium. Designed specifically for the faceplate of NEMA 14 stepper motors. The bracket allows for 2mm of...£4.00