Beaglebone

Showing the single result

Beaglebone Development Boards

Beaglebone development boards are a platform for developers and hobbyists supported by a vast community. Getting started on development takes less than 5 minutes and these low-cost development boards Boot up Linux in under 10 seconds!

Beaglebone Boards:

PocketBeagle BeagleBone Black BeagleBone Blue BeagleBone AI
Processor AM3358 AM3358 AM3358 AM5729
ARM Cortex-A8 ARM Cortex-A8 ARM Cortex-A8 2x ARM Cortex-A15
Maximum Processor Speed 1GHz 1GHz 1GHz 1.5GHz
Co-processors 2×200-MHz PRUs, ARM Cortex-M3, SGX PowerVR 2×200-MHz PRUs, ARM Cortex-M3, SGX PowerVR 2×200-MHz PRUs, ARM Cortex-M3, SGX PowerVR 4×200-MHz PRUs, 2x ARM Cortex-M4, 2x SGX PowerVR, 2x HD video
Analog Pins 2 (3.3V), 6 (1.8V) 7 (1.8V) 4 (1.8V) 7 (3.3V)
Digital Pins 44 (3.3V) 65 (3.3V) 24 (3.3V) 72 (3.3V) (7 shared with analog)
Memory 512MB DDR3 (800MHz x 16), microSD card slot 512MB DDR3 (800MHz x 16), 4GB on-board storage using eMMC, microSD card slot 512MB DDR3 (800MHz x 16), 4GB on-board storage using eMMC, microSD card slot 1GB DDR3 (2x 512Mx16, dual-channel), 16GB on-board storage using eMMC, microSD card slot
USB USB 2.0 480Mbps Host/Client Port, USB 2.0 on expansion header USB 2.0 480Mbps Host/Client Port, USB 2.0 Host Port USB 2.0 480Mbps Host/Client Port, USB 2.0 Host Port USB 3.0 5Gbps Host/Client Port, USB 2.0 Host Port
Network add-ons 10/100 Ethernet 2.4GHz WiFi, Bluetooth, BLE Gigabit Ethernet, 2.4/5GHz WiFi, Bluetooth, BLE
Video SPI displays microHDMI, cape add-ons SPI displays microHDMI, cape add-ons
Audio add-ons microHDMI, cape add-ons add-ons, Bluetooth microHDMI, Bluetooth, cape add-ons
Supported Expansion Interfaces 3x UART, 4x PWM, 2x SPI, 2x I2C, 8x A/D converter, 2x CAN bus (w/o PHY), 2x quadrature encoder, USB 4x UART, 12x PWM/Timers, 2x SPI, 2x I2C, 7x A/D converter, 2x CAN bus (w/o PHY), LCD, 3x quadrature encoder, SD/MMC, GPMC 4x UART, 2-cell LiPo, 2x SPI, I2C, 4x A/D converter, CAN bus (w/ PHY), 8x 6V servo motor, 4x DC motor, 4x quadrature encoder 4x UART, 12x PWM/Timers, 2x SPI, 2x I2C, 7x A/D converter, CAN bus (w/o PHY), LCD, 3x quadrature encoder, SD/MMC
On-board Sensors 10 degree of freedom IMU (accelerometer, gyroscope, magnetometer, thermometer), barometer/thermometer on-die temperature
Scroll to Top