Description
Conductive Ribbon - 3-Conductor (1 yard) Discontinued
This rather fancy conductive ribbon is essentially a fabric with 3 conductors woven into the ribbon. It measures roughly 0.2" wide and 0.03" thick. You will get a 1 yard (~3 foot long) section of the ribbon. It has very little (negligible) resistance to it.
The material is 68% tinsel and 32% polyester.
It has 3 discrete conductors, which means that you can transmit power, ground, and signal with a single ribbon!
It’s relatively flexible and durable.
As long as your iron isn’t too hot, it solders easily and makes for a good addition to any wearable electronics project.
Composition (by weight):
- 68% stranded tinsel wire
- 32% polyester
Electrical properties (per conductor):
- Resistance (typ.) = 0.3 Ohm/meter
- Resistance (max.) = 0.5 Ohm/meter
- Approx. AWG equivalency = 32 ga.
Ribbon Dimensions:
Related Products
Discrete Semiconductor selection (KIT-13682)
Sparkfun
£14.80
Discrete Semiconductor AssortmentKit
If you do anything with electronics, you're probably already using transistors, but you're probably using them in large, prepackaged clusters of just one type...
Conductive Thread 2M/6M
£2.50 - £3.00
Conductive Thread 2M/6M
Conductive thread is made to be used as your standard sewing yarn, however, this type is electrically conductive, enabling you to create powered e-textile projects! Nano...
Conductive Thread Bobbin - 30ft
Sparkfun
£4.10
Conductive Thread Bobbin - 60ft
This is 60 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin...
Conductive Thread - 60g (Stainless Steel)
Sparkfun
£55.00
Conductive Thread - 60g (Stainless Steel) SparkFun DEV-11791
This is about 360 yards of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to...
Pressure-Sensitive Conductive Sheet - Velostat / Linqstat
AdaFruit
£5.75
Adafruit 1361 Pressure-Sensitive Conductive Sheet - Velostat / Linqstat
This conductive material (also known as "Velostat" or "Linqstat") is a nice addition for your wearable/sensor hacking toolkit...
Copper Tape, Foil Tape with Conductive Adhesive - Range
£4.96 - £21.00
Copper Tape, Foil Tape with Conductive Adhesive - Range
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and...
Stainless Thin Conductive Thread, 2 ply, 23 meter/76 ft
AdaFruit
£7.15
Stainless Thin Conductive Thread, 2 ply, 23 meter/76 ft
This thread is 2 ply, a little thicker than everyday polyester or cotton thread but still thin enough to be sewn by hand in medium-eye needles...
Raspberry Pi GPIO Ribbon Cable - 40-pin, 6" (RPi2/3/4, B+)
Sparkfun
£4.00
Raspberry Pi GPIO Ribbon Cable - 40-pin, 6" (RPi2/3/4, B+)
This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi 2 and B+ so you can easily connect to the low-level peripherals and...
Ribbon Cable - 6 wire - 4.5m (15ft)
Sparkfun
£3.50
Ribbon Cable - 6 wire - 4.5m (15ft)
Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished...