ProtoPIC Blog

TutorialDescriptionThis short video we show you how to solder the headers to the exhi:bit DIY Daughter board the easy way. …

This guide will show you how to assemble the pedestrian crossing project board for the exhi:bit prototyping system for micro:bit. We also show you a quick demo of it running at the end. Please note the Red LEDs look orange in this video, that's due to the camera and lighting used.You can view the code here: GitHub …

Tutorial  If you would like to purchase the products in this video, click the associated product. DescriptionA demonstration of how to hook up an ATTINY85 chip to be programmed from an Arduino programmed with the ArduinoISP sketch. Both with jumper wires and our Arduino as ISP shield. …

 If you would like to purchase the products in this video, click the associated product.DescriptionThe Sparkfun Big Dome Push Button with a couple of methods of connecting it up to get it to light up nicely.   …

TutorialDescriptionThis video shows how to hook up a 5VDC 512 Step motor toArduinouino, using an EasyDriver stepper board. Here is a link to the code used in this demo.GET CODE  …

Tutorial   Description This video is a short tutorial on how to use the Pololu Crimper we sell  …

Tutorial Description This video features an instructional on the assembly of our Pan & Tilt Bracket.  …

Tutorial Description  This video contains an overview of this great soldering station and shows an example of the soldering that this station is capable of. Check a better soldering station alternative here. …

Tutorial Description   This is a demo of the crimping tool with a close-up of the alignment of the crimp in the jaws. …

  Tutorial     Description How to properly solder breakaway headers onto a Breakout Board. …