The FS90R is a micro-sized servo from FEETECH (formerly known as Fitec) specifically for continuous rotation. At 6 V, it has a maximum rotation speed of around 130 RPM (no-load) and can produce up to 21 oz-in (1.5 kg-cm) of torque. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great miniature actuator for beginner robotics projects; just throw on a one of the 5 included servo horns and your project is ready to rock!
The FS90R continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The default rest point is 1.5 ms, but this can be adjusted by using a small screwdriver to turn the middle-point adjustment potentiometer. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases.
FS90R Micro Continuous Rotation Servo Specifications:
- Operating Voltage: 4.8V – 6V
- Free-run current 6V: 200mA
- Stall current 6V 600mA
- Speed (4.8V): 110RPM
- Speed (6V): 130RPM
- Stall torque (4.8V): 18oz-in / 1.3 kg-cm
- Stall torque (6V): 21oz-in / 1.51 kg-cm
- Connector Wire Lenght: 20cm
- Required Pulse: 900us-2100us
- Direction: CCW
- Operating Angle: 360 degrees
- Weight: 9g
- Size: 23.2 X 12.5 X 22.0 mm
Follow Proto-PIC on Facebook and share your Micro Servo creation with us and our community of inventors. We love seeing our products used to solve problems or simply make something cool!
Problem with your order? Looking to become a distributor? Circuit not working the way you had hoped? Don’t hesitate to give us a call or e-mail and one of the Proto-PIC team will make sure you get the most out of our products and services!