MicroMod All The Pins (ATP) Carrier Board – Sparkfun DEV-16885
The MicroMod ATP carrier board enables you to access all the pins (i.e. ATP) of the MicroMod Processor Boards with ease!
This neat and compact motherboard breaks out the MicroMod Processor Board’s pins on the M.2 connector to 2.54mm (0.1″) spaced female headers and PTH pads on the edge of the board. This Carrier Board is also handy if you’re interested in switching between different MicroMod Processor Boards in your project.
A USB-C connector is provided for easy connection and programming. In addition to the pins broken out, two separate Qwiic-enabled I2C ports allow you to easily daisy chain Qwiic-enabled devices. We’ve exposed the SWD pins for more advanced users who prefer to use the power and speed of professional tools. A USB-A connector is provided for Processor Boards that have USB Host support. A backup battery is provided for processor boards with RTC.
If you need a “lot” of GPIO with a simple-to-program, ready for the market module, the ATP is the fix you need. There is even a convenient jumper to measure the current consumption for low power testing.
- M.2 Connector
- Operating Voltage Range
- ~3.3V to 6.0V (via VIN to AP7361C 3.3V Voltage Regulator)
- 3.3V (via 3V3)
- 1x USB type C
- 1x USB type A Host
- 2x Qwiic Enabled I2C
- 1x CAN
- 1x I2S
- 2x SPI
- 2x UARTs
- 2x Dedicated Analog Pins
- 2x Dedicated PWM Pins
- 2x Dedicated Digital Pins
- 12x General Purpose Input Output Pins
- 1x SWD 2x5 header
- 1mAh battery backup for RTC
- Phillips #0 M2.5x3mm screw included
Carrier Board Schematic:
Carrier Board Dimensions:
MicroMod Introduction Video:
- Depending on the design of the Processor Board, not all the pins may be accessible.