Polymer Lithium Ion Battery, 3.7V, 110mAh
These are very slim, extremely lightweight batteries based on Lithium Ion chemistry. Comes terminated with a standard 2-pin JST-PH connector – 2mm spacing between pins.
These batteries require special charging. Do not attempt to charge these with anything but a specialized Lithium Polymer charger.
These 3.7V Polymer Lithium-Ion (LiPo) batteries provide a high power capacity in a very small lightweight package. This makes them ideal for many applications. They are often used in portable consumer products such as Bluetooth speakers and mobile phones.
The batteries are supplied with 100mm leads terminated with a standard 2 pin JST-PHR-2PIN connector.
These Polymer Lithium batteries come with a built-in protection circuit that protects against; over-voltage, over-current, and over-discharge.
These batteries do not have a hard protective case. You should take care when housing the batteries in your design to ensure they have sufficient mechanical protection to protect the battery from any possible damage. If a battery does become damaged (dented, bent, etc) then it should not be used.
110mAh Lipo Features:
- Built-in protection circuit to prevent over-charging or discharging.
- Rated Capacity: 110mAh
- Nominal Voltage: 3.70V
- Max Charge Current: 1C (110mA)
- Normal Charge Current: 0.2C (22mA)
- 1.06 x 0.59 x 0.157″ (27 x 15 x 4 mm)
- 1 x Polymer Lithium Ion Battery – 110mAh.
110mAh LiPo Dimensions:
- Maximum length: 27mm
- Maximum width: 15mm
- Maximum height: 4mm
- Cable length: 60mm (nominal)