Xbee Socket, 10-Pin, 2mm Pitch
This is a 10-pin socket with a 2mm pitch that mates with the popular XBee radio from Digi.
Use this small part to avoid having to solder your precious radio to a PCB. You’ll need two of these sockets to connect to all 20 pins on the XBee.
These headers can also be cut to work with the RFID breakout board.
Specifications:
- Current Rating: 1.5A
- Insulator Resistance: 1000 Megohms Min.
- Contact Resistance: 20 Milliohms Max.
- Dielectric Withstanding: AC 500V/Minute
- Operating Temperature: -40°C ~ +105°C
- Contacts: Phosphor Bronze, Gold Flash over all
- Insulator: Polyester, PA6T+30%GF, UL 94V-0
- RoHS Compliant
Dimensions:
Notes:
- This item is sold singly, not in pairs.
raican –
Fully compatible with the Xbee pin headers, so just the job. Obviously you have to get them mounted perpendicular to the board, so just solder one point, then melt and adjust til it’s flush and upright. Once that’s done, do the rest.