Discontinued

Thermal Printer Paper - 34' This is a 34' roll of thermal printing paper for use with our thermal printer. This roll is smaller than you find at most office supply stores so it fits directly into the printer without having to remove any paper from the...

Thermochromatic Pigment - Red (20g) - Discontinued We’ve all seen toys and things that change color when you run them under warm water or heat them up in the sun. Some of us were especially mesmerized and had to find out what made them do that. It...

Flexinol Actuator Wire - 0.127mm (0.005″) Diameter (1 foot) Discontinued This 0.005" Flexinol Actuator Wire (aka shape-memory Nitinol) is a one-foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or...

Slide Potentiometer, Motorized POT, Linear Taper, 10k Discontinued These motorized sliders are very cool. Each is essentially a standard slide pot that is belt-driven by a small motor. The slide contains two separate 10k linear taper potentiometers so...

GPS Receiver, 66 Channel, 10Hz, LS20031 - Discontinued The LS20031 GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information...

MOSFET, P-Channel, 20V, 24A, Low VGS, TO-220 - Discontinued If you’ve ever wondered how to control high current devices from a low-power microcontroller, a MOSFET is what you need.The NDP6020P is a very common MOSFET with very low on-resistance and...

Teensy 3 Audio Board (Rev C) - Discontinued This is the Teensy Audio Adapter Board that can be added to a Teensy 3.0, 3.1, 3.2, 3.5 or 3.6 for your next audio project. This shield provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz...

MyoWare Muscle Sensor Power Shield - SparkFun DEV-13684 Discontinued The MyoWare Power Shield is designed to take two standard CR2032 coin cell batteries to power the MyoWare Muscle Sensor. We have made this board in a way that the coin cell batteries...

AZ3166 IOT Developer Kit for Microsoft Azure IoT DevKit, as its name says, is made for building cloud enabled IoT apps in a productive and fun manner.Now you already have the DevKit in your hand. Let's start building! To begin with, follow Get Started...

SparkFun DEV-13626 Photon Battery Shield - Discontinued The SparkFun Photon Battery Shield provides you with an easy way to power your Photon module with a Lithium polymer battery. Not only can the Battery Shield power you Photon but you will also be...

SparkFun WRL-13764 Particle Photon (No Headers) Discontinued Particle's IoT (Internet of Things) hardware development board, the Photon, provides everything you need to build a connected project. Particle has combined a powerful 120Mhz ARM Cortex M3...

SparkFun WRL-13774 Particle Photon (Headers) Discontinued Particle's IoT (Internet of Things) hardware development board, the Photon, provides everything you need to build a connected project. Particle has combined a powerful 120MHz ARM Cortex M3...