Sparkfun

Header - 6-pin Male, SMD, 2.54mm (0.1") These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work.The surface-mount side of the...

Header - 4-pin Male, SMD, 2.54mm (0.1") Right-Angle This is a surface-mount device (SMD).This is a 4-pin right-angle male header. Specifications: No. of Contacts: 4 Current Rating: 3A Insulator...

Header - 8-pin Male, SMD, 2.54mm (0.1") These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work.The surface-mount side of the...

Header - 2x8 Male, 0.1" (PRT-13156) This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character LCDs. Each pin has a spacing of 0.1"...

Header - 2x23-pin Male PTH, 0.1" (PRT-12791) This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header...

Header - 2x3, 6-pin Male, Shrouded, PTH, 2.54mm (0.1″) This is a 6-pin connector configured in two rows of three. It is shrouded and also keyed to ensure ease of use and to prevent accidental...

Headers - 6-pin 2x3, Male, PTH, 2.54mm (0.1") This is a simple 6 pin 2x3, male, PTH header. This header is in the common configuration for an ISP connector.Each pin has a spacing of 2.54mm (0.1") in...

Raspberry Pi GPIO Shrouded Header - 2x20 RPi2, B+ (PRT-13054 ) This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi 2 and Model B+ so you can easily connect via...

2x40 Way Break Away Male Headers - Right Angle - RA - 01." Pitch This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header...

Breadboard Power Supply Stick - 5V/3.3V (PRT-13032) This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for...

Jumper Wire – 0.1″ (2.54mm), 2-pin, 12″ (300mm) This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector...

Jumper Wire - 0.1" (2.54mm) Pitch , 3-pin, 12" (300mm) This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both...