Description
2.5mm Hex Key Bit
Have a cordless screwdriver? Feeling a bit lazy and want to build something cool out of aluminium extrusions but can be bothered fiddling about with a 'L' shaped allen key?
Well this 2.5mm hex key bit is the correct size to use with our M4 screws. They have a button head with a 2.5mm hex recess.
Use this with a cordless drill or screwdriver and you can put screws in or take them out at rapid prototyping pace, although be careful - set your drill torque ratchet to low to prevent any damage to the screws or thread if you accidentally cross thread them.
Related Products
HEX ALLEN ALAN KEY WRENCH 2.5MM
Bosch Rexroth Compatible
£1.00
HEX ALLEN ALAN KEY WRENCH 2.5MM
This allen key, or hex key as some people know them is 2.5mm across the flats.It will fit perfectly into our M4 8mm and 10mm button k
3mm Hex Key
Proto-PIC
£0.50
3MM HEX KEY
This 3mm Hex Key is made from fully hardened chrome vanadium steel with have chamfered edges to prevent damage to blade and fittings. The Key is marked with its size so you can easily...
Hex Key - 7/64" (Ball End)
Sparkfun
£1.61
Hex Key - 7/64" (Ball End) Discontinued
These long alloy steel 7/64" hex keys.The ball end style on each hex key allows a machine screw to be tightened at an angle.These hex keys are perfect for the...
Tool Kit - Screwdriver, Hex, Torx and Bit Set
Sparkfun
£12.00
Tool Kit - Screwdriver, Hex, Torx and Bit Set
There’s nothing worse than getting ready for a good hack and then realizing that you can’t even get the box open because you don’t have the right...
Slide Switch, SPDT, PTH, 2.5mm (0.1")
Sparkfun
£0.50
Slide Switch, SPDT, PTH, 2.5mm (0.1")
This SPDT slide switch is perfect for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", but due to their incredibly thin...