7-Segment Clock Display, 4 Digit, 1.2″ digit height

Clear
Add to Wishlist
Add to Wishlist
SKU: N/A Category:
Share on facebook
Share on twitter
Share on linkedin
Share on facebook
Share on twitter
Share on linkedin
7-Segment Clock Display, 4 Digit, 1.2″ digit height

I like big seven-segment displays and I cannot lie! Design a clock, timer or counter into your next project using our pretty, mars bar sized 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments there is a top right dot (perhaps useful as a degrees symbol) and two sets of colon-dots (good for time-based projects).

These are 38mcd bright. You can drive these with less current to get the same brightness to save power, or crank them up to 20mA and have them at their brightest. 560R Resistors will provide good current limiting for a nice brightness at 5V supply.

These displays are multiplexed, common-cathode. What that means it that you can use a 74HC595 or just 8 microcontroller pins if you can spare them to control the 8 anodes (7-seg + decimal) at about ~15mA each, and then connect NPN transistors or a TPIC6B595 to the cathodes to sink the 8*15mA = ~120mA maximum per digit.

We strongly recommend getting a 7-Segment LED Matrix backpack , which is an LED driver that fits on the back of this display. It really simplifies the wiring. 

Clock Display Technical Details

  • This is a Common Cathode LED display
  • Dimensions: 120mm x 41mm Weight: 50.8g
  • Datasheet

1_2 inch Quadruple Digit Numeric Displays dimensions

Reviews

There are no reviews yet.

Be the first to review “7-Segment Clock Display, 4 Digit, 1.2″ digit height”

You may also like…

Scroll to Top