8x32 RGB LED Matrix, Flexible, WS2812B, Neopixel

(No reviews yet) Write a Review
  • PPADA2294 Neopixel RGB LED MATRIX FLEXIBLE main 1
  • PPADA2294 Neopixel RGB LED MATRIX FLEXIBLE main 2
  • PPADA2294 Neopixel RGB LED MATRIX FLEXIBLE main 3
  • PPADA2294_Neopixel_RGB_LED_MATRIX_FLEXIBLE_main1


8x32 RGB LED Matrix, Flexible, WS2812B, Neopixel

This low-cost 8x32 LED matrix uses the popular WS2812B addressable LED also known as “Neopixel” and are mounted on a flexible black PCB.
For advanced NeoPixel fans, we now have a bendable, flexible 8x32 NeoPixel LED Matrix! Control all 256 ultra-bright LEDs using a single microcontroller pin, set each LED as you wish to scroll messages or draw little images. This matrix has a thick flexible PCB backing that can be gently bent and curved around surfaces
You can use this matrix just like any other NeoPixel-compatible product, and Adafruit have provided the NeoMatrix code that will let you use the matrix as a 8x32 grid for drawing on without having to do all the icky math Just initalize NeoMatrix with

Adafruit_NeoMatrix matrix = Adafruit_NeoMatrix(32, 8, PIN,  NEO_MATRIX_TOP + NEO_MATRIX_LEFT + NEO_MATRIX_COLUMNS + NEO_MATRIX_ZIGZAG, NEO_GRB + NEO_KHZ800);

Don't forget, with 256 LEDs, you could use over 15A of current if you turn on all the LEDs on to white (which we really do not recommend because we don't think the flex PCB can handle that much current). Try to keep the current draw at undrer 5A.
Please note: Flexible PCBs are not designed for repeated flexing! While we think this product may work in wearables or other situations where the matrix is bent around, we do not offer any guarantees or refunds if you end up cracking the LEDs or traces! This is for advanced users only, who already know how to use NeoPixels and are comfortable with the high current requirements and protecting the matrix from damage. There are no returns, refunds or replacements for damaged product. You cannot cut these panels into custom shapes as data/power lines run through the entire body of the PCB.
The PCB has 3 sets of wires soldered to the rear:

  • 5V - RED

They can be daisy-chained using the included JST connectors and each panel has separate power and ground so they can be powered individually.

View AllClose

Additional Information

World Semi
Part Number:
View AllClose