Description
Black Plastic Ball Caster - 3/8" - Pololu 950
This small, lightweight black plastic ball caster comes with a 3/8" diameter plastic ball. The height of the fully assembled kit ranges from 0.4" to 0.6", and can be customised by varying the combination of the included spacers used. With the included #2 screws the housing can be mounted to a chassis of your choice, or you can use your own #2 or M2 screws for a greater flexibility if you require a different length. The ball caster is designed for use in a small robot; they are not intended to be under more than a few pounds of load. If a greater load is applied, friction between the ball and the housing will generally keep it from rolling well.
Included Hardware:
- Black plastic housing (made of ABS plastic)
- One 3/8" diameter plastic ball
- Two Spacers (1/16" and 1/8" thick)
- Two #2 screws
- Two #2 nuts
Ball Caster Dimensions:
- Ball Diameter: 0.375 in (9.53 mm)
- Weight: 0.8 g
Note: printable version of the dimensions drawing can be found in the Documents section below.
Documents:
- Dimensions Drawing of the Ball Caster (pdf)
- 3D Model of the Ball Caster (459k zip)