Sparkfun
DC Barrel Jack 2.1mm - PTH - Breadboard Compatible
- SKU:
- PPPRT-10811
Description
DC Barrel Jack 2.1mm - PTH - Breadboard Compatible
This DC power jack/connector is just like the other one that we carry except that it’s terminated with breadboard-friendly pins instead of wide solder terminals.
These connectors are also compatible with our DC wall supplies and have a 5mm jack, with a 2.1mm center pole diameter.
Specifications:
- Rated Voltage: 20V DC
- Rated Current: 4A
- Contact Reistance: 30 milliohms Max.
- Insulation Resistance: 100 megaohms Min.
- Life rating: 5000 Cycles min.
- Insertion and Extraction Force: 3 ~ 30N
Recommended PCB Land Pattern:
2 Reviews
-
Title of review 973
fits and works a treat
-
Title of review 972
Works as expected - but doesn't fit into the +/- rails at the side of the breadboard as I had hoped. It has to be mounted in the main part of the board (as shown in the product images).
Related Products
2.1mm DC Barrel Jack to Alligator Clips
AdaFruit
£2.50
2.1mm DC Barrel Jack to Alligator Clips
Turn a wall adapter into a mini power supply with this incredibly useful adapter. A high-quality molded 2.1mm DC barrel jack is brought out to red (center...
Breadboard Power plate DC Jack kit
Proto-PIC
£3.50
Breadboard Power plate DC Jack kit
This simple little kit takes moments to solder but will make your bread-boarding life a whole lot easier for years to come. Breaking out a DC barrel jack connector...
2.1mm DC Barrel Plug to Alligator Clips
AdaFruit
£2.15
2.1mm DC Barrel Plug to Alligator Clips
Turn any battery pack into a power supply with this incredibly useful adapter. A high-quality molded 2.1mm DC barrel plug is brought out to red (center...
Vibration Switch, Flat, PTH, Breadboard friendly
AdaFruit
£1.00
Vibration Switch, Flat, PTH, Breadboard friendly
This is a low-sensitivity, directional vibration-induced trigger switch. Inside is a very soft spring coiled around a long metal pin. When...
DC Barrel Power Jack / Connector
Sparkfun
£0.60
DC Barrel Power Jack / Connector
A DC power jack/connector. This is a common barrel-type power jack for DC wall supplies.These are compatible with our DC mains supplies and have a 5mm jack, with a 2...
DC Barrel Jack Plug - Male
Sparkfun
£1.00
DC Barrel Jack Plug - Male
This barrel jack plug is great for adding a common connector to the end of our wires.This jack is compatible with 5mm barrel jacks that have a 2.1mm center pole diameter...
DC Barrel Jack Plug - Female
Sparkfun
£1.00
DC Barrel Jack Plug - Female
This female DC barrel jack plug is great for adding a common connector to the end of your wires.This jack is compatible with 5.5x2.1mm barrel connectors.The outer shell...
Arduino Compatible Breadboard Kit
Proto-PIC
£7.00
Arduino Compatible Breadboard Kit
This kit has all the components to build an Arduino compatible stand-alone on a breadboard (we even supply the breadboard), all you need to program the chip is an...
4 X AA Battery holder with on/off switch and 2.1mm Barrel jack
Proto-PIC
£3.40
4 X AA Battery holder with on/off switch and 2.1mm Barrel jack
This is a simple 4 cell AA battery holder. The 20CM (Approx) cable is terminated with a standard 5.5x2.1mm, center positive barrel jack...