GPIO Expansion Board for Raspberry Pi

GPIO Expansion Board for Raspberry Pi

This GPIO Expansion Board for Raspberry Pi is a credit card-sized, T-shaped board that connects to the 2x20 pin GPIO connector of your Raspberry Pi. This enables you to break out all 40 of the Raspberry Pi's GPIO, I2C, and SPI pins onto a solderless breadboard for prototyping! This product was designed from the ground up to be compatible with all models of Raspberry Pi (which are equipped with 2x20 pin connectors) and require no soldering whatsoever.
To make life even easier, all of the pin-outs are labeled clearly on the expansion board for efficient prototyping without the need for a pin-out document littered on your desk.
A 6" 2x20 pin Ribbon Cable is included with the expansion board as standard to make sure you can tinker away straight out of the box!

Features:

• Specifically designed for all models of Raspberry Pi with 2x20 connectors, open up your prototyping capabilities with 40 I/O's
• Enables you to break out all the GPIO, I2C, and SPI pins onto a breadboard
• 40-pin Ribbon Cable included
• Expansion board pins are all labeled clearly, no longer will you need to keep a pin-out document

GPIO Expansion Board Includes:

• 1x GPIO Expansion Board with pre-soldered headers
• 1x GPIO Ribbon Cable (40-pin, 6″)

Dimensions:

• 73mm x 20mm x 11mm / 2.9" x 0.8" x 0.4"
• Height with pins: 19mm / 0.8"
• Width at top of T: 58mm / 2.3"
• Weight: 14g