Description
JST SH Jumper 4-Pin Wire and Connector Assembly
This is a simple four wire cable.
Great for jumping from board to board or just about anything else.
They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket.
Connector Specifications:
- Voltage Rating: 50V (AC)
- Current Rating: 1A
- Contact Resistance: 20 Milliohms Max.
- Insulation Resistance: 100 Megaohms Min.
- Dielectric Withstanding Voltage: 500V (AC) / 1 Minute
- Contacts: Tin Plate Phosphor Bronze
- Temperature Range: -25 ~ +85°C
- Connector pitch: 1mm
- No. of contacts: 4
- RoHS Compliant
Cable Specifications:
- Wire: UL1571 28 AWG
- RoHS Compliant
Cable Dimensions:
- Cable Length: 200mm (8″)
Connector Dimensions:
Recommened PCB Land Pattern:
- dimensions are in mm
- no. of contacts may vary
1 Review
-
Title of review 966
A well made and good value 4 pin JST plug with flying leads. If you buy the GT-511C3 fingerprint scanner, make sure you get one of these.
Related Products
JST SH Jumper 6-Pin Wire and Connector Assembly
Sparkfun
£1.80
JST SH Jumper 6-Pin Wire and Connector Assembly
This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below...
JST Jumper 4 Wire Assembly
Sparkfun
£1.80
JST Jumper 4 Wire Assembly
This is a simple four wire cable. Great for jumping from board to board or just about anything else.There is a 4-pin JST connector on one end, bare cable on the opposite...
Jumper Wire - JST to Female Connector - 2-pin
Sparkfun
£1.45
Jumper Wire - JST to Female Connector - 2-pin
This is a simple two wire cable.One end has a 2 pin female 0.1" pitch connector. The opposite end has a 2-pin JST connector.The wires are twisted...
JST Jumper Wire - 3-Pin
Sparkfun
£1.25
JST Jumper Wire - 3-Pin
Three pin JST connector with red, black, and yellow colors. 130mm (5") wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp...
JST Jumper 3 Wire Assembly
Sparkfun
£1.45
JST Jumper 3 Wire Assembly
This is a simple three wire cable. Great for jumping from board to board or just about anything else.There is a 3-pin JST connector on one end, bare cable on the opposite...