Description
Mini PMDC Motor 3V 16kRPM with or without mount
The Mini PMDC Motor 3V 16kRPM operates at 3V. The Motor will run at 16,000 RPM ±10% with no load and 3V supplied. The 10mm shaft allows you to drive a variety of external components, you choose!
NEW - Add a Universal Mounting Bracket to your order. Allowing you to increase the scope of your project and fix your programmed motor anywhere! The Self-adhesive base allows quick installation, plus 4 screw holes to enable permanent fixing to any surface.
Specifications:
- Rated Voltage: 3V DC
- Direction of Rotation: CWW
- Electrical Characteristics (at the initial stage after 30 seconds run-in)
- No Load Current: 0.4A Max.
- No Load Speed: 16000 ±10%rpm
- Rated Load: 11.9 g.cm (tested with fan)
- Rated Current: 1.5A Max.
- Rated Speed: 12400 ±8%rpm
- Noise: 30cm ≤68dB
- Torque: 10 g-cm
- Output Watts: 1.23W
Mechanical Characteristics:
- End Play: 0.05mm to 0.45mm
- Runout of shaft extension: 0.02mm Max.
Mini Motor Dimensions:
- 14mm High
- 20 mm diameter
- 9.7±0.5mm depth for the shaft.
1 Review
-
Title of review 29927
Top notch little DC motors for only a single pound coin! The option for a mount is a nice touch!
Related Products
El Inverter 3V (COM-10201)
Sparkfun
£9.65
El Inverter 3V - SparkFun COM-10201 - Discontinued
EL inverters allow you to drive EL wires. This particular EL inverter accepts 3V input and outputs 110VAC to drive EL wire. The wires both...
EL Inverter 3V - Chasing (COM-12933)
Sparkfun
£6.43
EL Inverter 3V (Chasing) - SparkFun COM-12933 - Discontinued
EL Inverters, if you are wanting to do anything with EL lighting you need one, period. This 3V EL Inverter is a special type that is...
FTDI FT232 Breakout Board, USB to serial, 3V, and 5V Selectable
Proto-PIC
£8.00
FTDI FT232 Breakout Board, USB to serial, 3V, and 5V Selectable
This breakout board for the FTDI FT232RL USB to serial converter has been designed to work with standard TTL UART interfaces. The major...
ProtoShield Mini for Arduino Pro Mini
Sparkfun
£2.58
ProtoShield Mini for Arduino Pro Mini - SparkFun DEV-09709 Discontinued
This is a small prototyping shield for the Arduino Pro Mini. If your project requires just a little bit more space for your...
Machined Aluminium Bracket for 37D Metal Gearmotors
Pololu
£8.50
Machined Aluminium Bracket for 37D Metal Gearmotors
These Machined Aluminium Brackets for 37D Metal Gearmotors allow you to mount and fix your gearmotor to a surface or project! The brackets have...
Haptic Motor Driver - DRV2605L
Sparkfun
£10.00
Haptic Motor Driver - DRV2605L
You won't be needing the Beach Boys when you have the SparkFun Haptic Motor Driver at hand to add some good vibrations to your project! Using the DRV2605L from Texas...
Dual Motor GearBox by Tamiya
Sparkfun
£10.36
Dual Motor GearBox by Tamiya - Discontinued
Dual gearbox from Tamiya. This is an excellent way to get started quickly with robotics! You may have read many websites about servos, gear head motors, DC...
H-Bridge Motor Driver for DC Motors, L9110H, 2.5V-12V, 800mA, DIP8
AdaFruit
£1.75
H-Bridge Motor Driver for DC Motors, L9110H, 2.5V-12V, 800mA, DIP8
Run two solenoids or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip...
Mini Diagonal Cutters
Sparkfun
£3.00
Mini Diagonal Cutters
Mini Diagonal Cutters. These are great little cutters! A must have for clipping leads and extra solder tails. 4" long.