Description
OpAmp Breakout LMV358 - SparkFun BOB-09816
This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path.
The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed. The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer.
Documents:
- Schematic
- LMV358 datasheet
- Eagle Files
Replaces: BOB-08704
Related Products
RJ45 MagJack Breakout (BOB-13021)
Sparkfun
£7.00
RJ45 MagJack Breakout - SparkFun BOB-13021
This is the SparkFun RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The...
RJ11 Breakout Board (BOB-14021)
Sparkfun
£2.25
RJ11 Breakout Board - SparkFun BOB-14021
This is the SparkFun RJ11 Breakout, two simple breakout boards for the common 6-pin RJ11 connector. These little boards can easily have one of our RJ11 6-Pin...
MAX3232 Breakout Board (BOB-11189)
Sparkfun
£6.50
SparkFun MAX3232 Breakout - SparkFun BOB-11189
The ‘must-have’ IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and...
Breakout Board for Thumb Joystick (BOB-09110)
Sparkfun
£2.50
Breakout Board for Thumb Joystick -SparkFun BOB-09110
This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and includes 4 mounting holes in the corners...
SparkFun BOB-09540 L298N Breakout Board
Sparkfun
£3.50
SparkFun BOB-09540 L298N Breakout Board
This is a breakout board for the L298N full-bridge dual motor driver; which comes in a staggered, Multiwatt package.All pins of the L298N are broken out to a...