Servo - Small (Sub-Micro Size), 180-¦

Servo - Small (Sub-Micro Size), 180° - SparkFun ROB-09065

Here is a simple, low-cost, high-quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60°
This small servo comes with a standard 3 pin power and control cable, and all hardware listed below.

Small Servo Features:

• Voltage: 4.8-6.0 Volts
• Torque: 16.6/20.8 oz-in. (4.8/6.0V)
• Speed: 0.15/0.10 sec/60å¡ (4.8/6.0V)
• Rotation: ~160°
• Single Top Ball Bearing
• Nylon Gears
• 3-Pole Ferrite Motor

Small Servo Included Parts:

• 1x Micro Size Servo
• 1x Single Arm Micro Horn
• 1x Double Arm Micro Horn
• 1x Four Point Micro Horn
• 1x Circle Micro Horn
• 2x 2x8mm Phillips Screw

• Dimensions are in inches [mm]

Small Servo Dimensions:

• Length: 31.8mm (1.25")
• Width: 29mm (1.14")
• Depth: 11.7mm (0.46")
• Cable Length: 160mm (6.3")
• Weight: 9g

Small Servo Notes:

• This servo is rated for 180° rotation, but in actuality, it only hits ~160°

Small Servo Connecting and Coding with mbed:

Because servos require a decent amount of power you should always use an external power source rather than USB!:

Code:
[code lang="cpp"]
// Hello World to sweep a servo through its full range

#include "mbed.h"
#include "Servo.h"

Servo myservo(p21);

int main() {
for(float p=0; p<1.0; p += 0.1) {
myservo = p;
wait(0.2);
}
}
[/code]

Sub-micro Servo Documents:

• Mechanical Files:
  • PPROB-09065_blender
  • PPROB-09065_iges
  • PPROB-09065_solidworks
  • PPROB-09065_step
  • PPROB-09065_stl