Description
Sewable Tilt Switch
This sewable tilt switches from Kitronik can be used to activate your e-textiles project when it is tilted.
When horizontal this switch is off. When tilted 10 from horizontal the tilt switch is on.
It has two connection points to which the conductive thread is connected. The PCBs are double sided making the conductive thread connection very reliable (see example picture below).
Features:
- Double Sided PCBs for reliable connections.
Contents:
- 1 x Sewable Tilt Switch.
Dimensions:
- Length: 26mm.
- Width: 6.5mm.
- Height: 7mm.
Resources:
Physical characteristics:
- Length: 26mm.
- Width: 6.5mm.
- Height: 7mm.
- Maximum Switch Rating Voltage DC: 24V.
- Maximum Switch Rating Current: 0.025A (25mA).
Related Products
LilyPad Manual - Sewable Electronics Kit Guidebook
LilyPad
£6.00
LilyPad Manual - Sewable Electronics Kit Guidebook
The full-color Lilypad Manual, Sewable Electronics Kit Guidebook contains step-by-step instructions for creating four interactive projects from the...
Coin Cell Holder CR2032, Sewable SMD
Sparkfun
£1.80
Coin Cell Holder CR2032, Sewable SMD
This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in, pop-out feature that makes changing the battery easy. The feet of the...
Tilt Ball Switch Sensor - AT407
Sparkfun
£1.50
Tilt Ball Switch Sensor - AT407
This AT407 tilt switch can easily be used to detect orientation. Inside the body of this device are a pair of balls that make contact with the pins when the case is...
Pan/Tilt Bracket (SparkFun ROB-10335)
Sparkfun
£6.50
Pan/Tilt Bracket (SparkFun ROB-10335)
This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. We recommend our...
Toggle Switch - 3PDT
Sparkfun
£3.46
Toggle Switch - 3PDT Discontinued
This heavy-duty, 3-pole, double throw (3PDT) toggle switch is rated for up to 15 Amps of current. It can be panel mounted with a 7/16" hole.Too many throws? Not...
DPDT Toggle switch
Proto-PIC
£3.60
DPDT Toggle switch
A standard DPDT toggle switch rated 2A 250Vac, 6A 125Vac. Supplied with on/off plate.
Body size:
27·5 x 17 x 14·5mm high
Single Touch Switch
Proto-PIC
£2.50
Single Touch Switch
This easy to use capacitive touch switch can operate between 2V and 5.5V, so is ideal for using with your Micro:bit, Raspberry Pi, ESP8266 or Arduino. This module acts as a...
Reed Switch Sensor
Sparkfun
£1.60
Reed Switch Sensor
This small reed switch, when exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the...
Rotary Switch Breakout
Sparkfun
£1.93
Rotary Switch Breakout - Discontinued
This is the SparkFun Rotary Switch Breakout, a very simple board designed to easily provide you access to each pin on our 10-position rotary switches. This...