Description
SparkFun CAB-10087 OBDII to DB9 Cable
Once you’ve hacked everything, why not go out in the garage and hack your car? This cable allows you to access the pins on your car’s OBDII connector. It has an OBDII connector on one end and a DB9 female serial connector on the other. The overall length of the cable is 5'.
Note: This cable is not meant to be plugged directly into a computer’s serial port. It is meant to plug into some sort of hardware interface.
Here is the basic pinout (OBDII > DB9 Female)
| Pin Description | OBDII | DB9 |
| J1850 BUS+ | 2 | 7 |
| Chassis Ground | 4 | 2 |
| Signal Ground | 5 | 1 |
| CAN High J-2284 | 6 | 3 |
| ISO 9141-2 K Line | 7 | 4 |
| J1850 BUS- | 10 | 6 |
| CAN Low J-2284 | 14 | 5 |
| ISO 9141-2 L Line | 15 | 8 |
| Battery Power | 16 | 9 |
Documents:
Related Products
SparkFun CAB-10759 Passive PoE Cable Set
Sparkfun
£6.00
SparkFun CAB-10759 Passive PoE Cable SetIntegrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet...
SparkFun CAB-11604 USB OTG Cable - Female A to Micro A - 4"
Sparkfun
£3.50
SparkFun CAB-11604 USB OTG Cable - Female A to Micro A - 4"
USB On-The-Go is a really useful USB specification! It allows some small devices that would usually be unable to act as a host to have...
SparkFun GPS-00574 Interface Cable for EM401 and EM406
Sparkfun
£4.00
SparkFun GPS-00574 Interface Cable for EM401 and EM406This is a 1.75" long JST SH communication cable which can be cut and hacked to your needs and can even be used as pigtails. This little guy can...
Cable Carrier - 10x15mm (0.5m Length) SparkFun ROB-13207
Sparkfun
£11.00
SparkFun ROB-13207 Cable Carrier - 10x15mm (0.5m Length)
No, this isn’t a tank tread, this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at each end...
SparkFun OpenScale SEN-13261
Sparkfun
£35.00
SparkFun OpenScale SEN-13261
The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature. It has the ability to read multiple types of load cells and offers a...
SparkFun Electret Microphone Breakout
Sparkfun
£7.50
Electret Microphone Breakout
This Electret Microphone Breakout board couples an Electret microphone (100Hz--10kHz) with a 60x mic preamplifier to amplify the sounds of voice, claps, door knocks or...
Sparkfun Weather Shield for Arduino
Sparkfun
£42.96
Weather Shield for Arduino - Sparkfun DEV-13956 Discontinued
The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity,...
SparkFun DEV-10899 LilyTiny
Sparkfun
£4.75
SparkFun DEV-10899 LilyTiny
The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even though it’s as small as some of the...
Sparkfun Premium Jumper Wires
£1.50 - £33.00
SparkFun Premium Jumper Wires for Breadboards or Headers
When you are prototyping a project, one of the more time consuming tasks is making up the jumper interconnects between different components,...