SparkFun Qwiic Shield for Thing Plus

SparkFun Qwiic Shield for Thing Plus

Welcome your Thing Plus or Feather board into the Qwiic Ecosystem with the SparkFun Qwiic Shield for Thing Plus. Due to Thing Plus and Feather having interchangeable footprints, this shield can be used with any arduino board which uses either! This works by connecting the I2C bus on your thing plus to four Qwiic connectors on the Shield, allowing you to have Qwiic access to GND, 3.3V, SDA, and SCL. The SparkFun Qwiic ecosystem can be daisy chained, as long as your devices are on different addresses, you can connect as many Qwiic devices as you see fit!
Included with the Qwiic shield are 12-pin and 16-pin headers which will need to be soldered to the shield and Thing Plus if required. Take care to match the markings on the PCB to the appropriate pins on your Thing to avoid possibly damaging your boards.
We love the Thing, so make sure to check out the rest of the Things we have waiting for you!

Features

• Thing Plus and Feather Footprint Compatible
• 4x Qwiic Connection Ports
• I²C Jumper
• 3.3V and GND Buses

Kit includes