Proto-PIC
VEROBOARD 1.6mm 101.6mm x 121.92mm Epoxy Paper 01-0021
(No reviews yet)
Write a Review
- SKU:
- PPVERO010021
Description
The PPVERO01-0021 is a single sided Veroboard for development and prototyping work. This board provides 41 tracks with 44 holes per track. Veroboard is designed primarily for hard wiring of discrete components, typically in analogue circuits, but is equally useful where a number of common bus or signal lines are required. Veroboard is manufactured from copper clad laminated board which has been pierced with a grid of holes and machined to provide parallel tracks.
- Ideal for Hard Wiring or Discrete Components
- SRBP Base Material
- Board Type Prototype Board
- Board Material Epoxy Paper
- Hole Diameter 1.02mm
- External Height 101.6mm
- External Width 121.92mm
- Board Thickness 1.6mm
- Product Range -
- SVHC No SVHC (17-Dec-2015)
Additional Information
Brand: |
Proto-PIC |
Part Number: |
VERO010021 |
Barcode: |
5055421083588 |
Related Products
Sparkfun Snappable Protoboard - Veroboard
Sparkfun
£9.00
Sparkfun Snappable Protoboard - Veroboard - PRT-13268
Sometimes it’s nice to have a protoboard that’s super long and skinny, super small or just a bunch of holes. The SparkFun Snappable Protoboard is...
Button Cell Battery - 11.6mm Diameter (LR44)
Sparkfun
£0.77
Button Cell Battery - 11.6mm Diameter (LR44) - Discontinued
These LR44 button cell batteries are fairly common but it can be hard to keep them around. They fit our digital calipers, so if you use...
Thermal Printer Paper - 34'
Sparkfun
£2.00
Thermal Printer Paper - 34'
This is a 34' roll of thermal printing paper for use with our thermal printer. This roll is smaller than you find at most office supply stores so it fits directly into the...
ESP-01 USB Programmer
Proto-PIC
£3.00
ESP-01 USB Programmer
This USB programmer is used to upload your program/HEX/sketch file to the popular ESP-01. You no longer have to use a jumble of wires to upload, just plug and go. This...
2x40 Way Break Away Male Headers - Right Angle - RA - 01." Pitch
Sparkfun
£1.45
2x40 Way Break Away Male Headers - Right Angle - RA - 01." Pitch
This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header...
Thermoelectric Cooler - 40mm x 40mm
Sparkfun
£12.00
Thermoelectric Cooler - 40mm x 40mm
Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used...
Battery Holder, 8 x AA
AdaFruit
£3.00
Battery Holder, 8 x AA
When you need a portable 12V power pack, this big holder will do the job! The holder will store 8 AA batteries end to end, to give approximately 12VDC output with up to 2 amp...
Black Knob - 15 x 19mm
Sparkfun
£1.20
Black Knob - 15 x 19mm
Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray.This knob mates to a 0.25" shaft with a set screw...
Silicon repair mat 17.7 X 11.8 INCH (45 X 30CM) anti-slip base
Proto-PIC
£15.00
Silicon repair mat 17.7 X 11.8 INCH (45 X 30CM) anti-slip base
APPLICATION: It is an ideal silicone mat for soldering electronic assemblies or for repairingelectronics and printed circuit boards, eg...