JST Connectors and Wires

JST to Breadboard Jumper (3-pin) This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a...

JST SH Jumper 4-Pin Wire and Connector Assembly This is a simple four wire cable.Great for jumping from board to board or just about anything else.They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket...

2 Pin JST Connector Female Housing XHP-2 These 2 Pin JST female housing connectors are the correct size to mate with the Seeeduino power connectors, remember they do not come with the crimps which need to be ordered separately.

JST - Connector - Crimp XH 22-28AWG These are basic crimps for JST 2 Pin female header connectors.

Barrel Jack to 2-pin JST Cable 160mm Two-pin JST connector to a 2.1x 5.5mm barrel jack, 160mm long jumper cable.This is a handy cable that can take a mains wall power supply to a relatively small, SMD JST connector.Because many of the SMD connectors used...

Cable Interface for EM408, 1 Foot, JST Interface Cable for EM408 - 1 Foot - Cable has two a 5-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.

JST Jumper Wire - 3-Pin Three pin JST connector with red, black, and yellow colors. 130mm (5") wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save you 15-20...

JST Connector - SMD 4-pin (Horizontal) The Qwiic 1mm JST is a very small 4-pin connector. This part can be used with all of our Qwiic-based boards and can create your own I2C-based device compatible with the Qwiic system. Furthermore, the connector will...