Description
Breakout for JST SH-Style Connector, 6-Pin Male Side-Entry
This breakout board is a neat adapter between a JST SH-style 6-pin male connector and a breadboard-compatible 0.1″-pitch row of through-holes.
It works with our assortment of 6-pin female JST SH-style cables and can be used to more easily access the pins of our Micro Metal Gearmotor Encoders with top-entry and side-entry connectors. The silkscreen on the bottom side of the board is labeled with this specific application in mind, indicating which pin on the breakout board would correspond to which pin on the encoder.
We have the mating cables available here!
Board Dimensions:
Related Products
JST SH Jumper 6-Pin Wire and Connector Assembly
Sparkfun
£1.80
JST SH Jumper 6-Pin Wire and Connector Assembly
This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below...
Cable, 6-Pin, Female-Female, JST SH-Style, Range
£2.50 - £3.70
Cable, 6-Pin, Female-Female, JST SH-Style, 10cm 16 cm 24 cm 40cm 63cm
This cable is made up of bright and colourful 6x 28AWG wires, twisted together and with a 6-pin JST SH connector at either...
JST SH Jumper 4-Pin Wire and Connector Assembly
Sparkfun
£1.45
JST SH Jumper 4-Pin Wire and Connector Assembly
This is a simple four wire cable.Great for jumping from board to board or just about anything else.They have bare wires on one end and a 4-pin JST SH...
JST RCY Connector Set - Male and Female (2-pin)
Sparkfun
£1.00
JST RCY Connector Set - Male and Female (2-pin)
The RCY connector from JST is a compact, 2.5mm pitch wire to wire connector typically suited to low-voltage applications running 10A or less. They are...
JST RCY Connector Pack, Male (3 Pack)
£2.50
JST RCY Connector Pack, Male (3 Pack)
This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. The connector...
Qwiic JST Connector - SMD 4-pin (Horizontal)
Sparkfun
£0.75
JST Connector - SMD 4-pin (Horizontal)
The Qwiic 1mm JST is a very small 4-pin connector. This part can be used with all of our Qwiic-based boards and can create your own I2C-based device compatible...
Jumper Wire - JST to Female Connector - 2-pin
Sparkfun
£1.45
Jumper Wire - JST to Female Connector - 2-pin
This is a simple two wire cable.One end has a 2 pin female 0.1" pitch connector. The opposite end has a 2-pin JST connector.The wires are twisted...
2 Pin JST Connector Female Housing XHP-2
Proto-PIC
£0.25
2 Pin JST Connector Female Housing XHP-2
These 2 Pin JST female housing connectors are the correct size to mate with the Seeeduino power connectors, remember they do not come with the crimps which...
JST RCY Connector Pack, Female
£2.50
This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be...