Description
Button Pad 2x2 Top Bezel
This is a black 1/8" ABS plastic bezel, custom made to mate with the silicon rubber pads.
We use four 4/40-0.5" size screws matched with plastic standoffs to attach the 2x2 button pad and Simon project boards.
Using two of these bezels with two of the bottom bezels will create a 4x4 bezel appropriate for the full button pad.
Top Bezel Dimensions:
Button Pad 2x2 Assembly Instructions:
- Place button pad on assembled PCB.
- Place bezel sections 1 and 3 on their respective button pad quadrants.
- Place bezel sections 2 and 4 on their respective button pad quadrants.
- Secure bezels with 10 #4-40 x 1/2" screws and matching nuts or stand-offs.
Documents:
Related Products
Button Pad 2x2 Bottom Bezel
Sparkfun
£4.20
Button Pad 2x2 Bottom Bezel - SparkFun COM-08747
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic.Using two of these bezels with two of the top...
Button Pad 2x2 - LED Compatible
Sparkfun
£1.75
Button Pad 2x2 - LED Compatible - SparkFun COM-07836
This is a translucent silicon rubber button pad with 4 buttons. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED...
Button Pad 2x2 - Breakout PCB
Sparkfun
£4.00
Button Pad 2x2 - Breakout PCB - SparkFun COM-09277
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the...
Button Pad 4x4 - Breakout PCB (COM-08033)
Sparkfun
£6.40
Button Pad 4x4 - Breakout PCB - SparkFun COM-08033
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back...
Keypad to Serial Converter Kit for Matrix Button Pads
Proto-PIC
£5.00
Keypad to Serial Converter Kit for Matrix Button Pads
This great little board is supplied as a kit, with the PCB, Capacitor, Headers & a Chip programmed with the code, ready to go. Once you have...