Description
Button Pad 4x4 - Breakout PCB - SparkFun COM-08033
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad.
Now with footprints for diodes! Use the super cheap 1N4148 through hole diodes. These can be used to isolate the switches to make for a bit easier decoding.
Schematic:
Documents:
- 74HC4511 (Datasheet)
Related Products
LED Range - Diffused, Clear, RGB, 3mm, 5mm and 10mm
£0.20 - £3.00
LED Range - Diffused, Clear, RGB, 3mm, 5mm and 10mm
white clear red green blue pink ornage yellow
This is our range of basic Through Hole LEDs are available in 3mm, 5mm, 10mm in all the standard...
Diffused LED - RGB 10mm
Sparkfun
£0.90
Diffused LED - RGB 10mm
Check out these big 10mm through-hole LEDs!The opaque epoxy package causes these LEDs to have a soft, diffused glow.
Button Pad 4x4, Silicon Rubber, LED Compatible (COM-07835)
Sparkfun
£6.00
Button Pad 4x4, Silicon Rubber, LED Compatible - Sparkfun COM-07835
This is a translucent silicon rubber button pad with 16 buttons. Each button has a hole underneath that accepts either a 3mm...
Button Pad 2x2 Top Bezel
Sparkfun
£1.75
Button Pad 2x2 Top Bezel
This is a black 1/8" ABS plastic bezel, custom made to mate with the silicon rubber pads.We use four 4/40-0.5" size screws matched with plastic standoffs to attach the
Button Pad 2x2 Bottom Bezel
Sparkfun
£4.20
Button Pad 2x2 Bottom Bezel - SparkFun COM-08747
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic.Using two of these bezels with two of the top...