Description
Jumper Wire - 2-Pin to PTH (Black, White)
This is a simple two wire cable.
One end has a 2-pin 0.1" pitch female connector, the opposite end is stripped and tinned stranded wire.
Dimensions:
- 120mm (4.75") length
Related Products
Jumper Wire - JST to Female Connector - 2-pin
Sparkfun
£1.45
Jumper Wire - JST to Female Connector - 2-pin
This is a simple two wire cable.One end has a 2 pin female 0.1" pitch connector. The opposite end has a 2-pin JST connector.The wires are twisted...
Automotive Jumper 2-Pin Wire and Connector Assembly
Sparkfun
£2.50
Automotive Jumper 2-Pin Wire and Connector Assembly
This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle.We've also used thicker 18 AWG wire,...
Molex Jumper 2-Pin Wire and Connector Assembly
Sparkfun
£1.00
Molex Jumper 2-Pin Wire and Connector Assembly
This is a simple two wire cable. Great for jumping from board to board or just about anything else.There is a 2-pin Molex connector with 0.1" spacing on...
JST Jumper Wire - 3-Pin
Sparkfun
£1.25
JST Jumper Wire - 3-Pin
Three pin JST connector with red, black, and yellow colors. 130mm (5") wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp...
Jumper - 2 Pin
Proto-PIC
£0.40
Jumper - 2 Pin
These are two pin jumpers (also called shunts) that will create an electrical connection between two pin headers.These are commonly used to modify settings on a board or device.Do you...