Description
Mega Pro Mini Cable - 8" (8-wire) JST-SH - SparkFun PRT-10853
This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini. Pick up a few of these to break out all of those pesky pins. Integrating these connectors into your projects makes it possible to quickly swap out a Mega Pro Mini between two or more different enclosures. One end is terminated with a JST-SH connector and the other end is tinned bare wire leads.
Note: It takes 10 of these cables to break out every pin on the Mega Pro Mini, so make sure that you order enough for your application.
Note: The color of these wires may change from batch to batch so be sure to check your pinouts!
Dimensions: 8" length
Documents:
Related Products
JST SH Jumper 4-Pin Wire and Connector Assembly
Sparkfun
£1.45
JST SH Jumper 4-Pin Wire and Connector Assembly
This is a simple four wire cable.Great for jumping from board to board or just about anything else.They have bare wires on one end and a 4-pin JST SH...
JST SH Jumper 6-Pin Wire and Connector Assembly
Sparkfun
£1.80
JST SH Jumper 6-Pin Wire and Connector Assembly
This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below...
Cable, 6-Pin, Female-Female, JST SH-Style, Range
£2.50 - £3.70
Cable, 6-Pin, Female-Female, JST SH-Style, 10cm 16 cm 24 cm 40cm 63cm
This cable is made up of bright and colourful 6x 28AWG wires, twisted together and with a 6-pin JST SH connector at either...
JST Jumper 4 Wire Assembly
Sparkfun
£1.80
JST Jumper 4 Wire Assembly
This is a simple four wire cable. Great for jumping from board to board or just about anything else.There is a 4-pin JST connector on one end, bare cable on the opposite...
JST Jumper 3 Wire Assembly
Sparkfun
£1.45
JST Jumper 3 Wire Assembly
This is a simple three wire cable. Great for jumping from board to board or just about anything else.There is a 3-pin JST connector on one end, bare cable on the opposite...
JST Jumper Wire - 3-Pin
Sparkfun
£1.25
JST Jumper Wire - 3-Pin
Three pin JST connector with red, black, and yellow colors. 130mm (5") wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp...
JST Jumper 2 Wire Assembly
Sparkfun
£0.65
JST Jumper 2 Wire Assembly
This is a simple two wire cable. Great for jumping from board to board or just about anything else.There is a 2-pin JST-PH connector on one end and bare cables on the...
Breakout for JST SH-Style Connector, 6-Pin Male Side-Entry
£1.25 - £2.50
Breakout for JST SH-Style Connector, 6-Pin Male Side-Entry
This breakout board is a neat adapter between a JST SH-style 6-pin male connector and a breadboard-compatible 0.1″-pitch row of...
Cable Interface for EM408, 1 Foot, JST
Sparkfun
£2.70
Cable Interface for EM408, 1 Foot, JST
Interface Cable for EM408 - 1 Foot - Cable has two a 5-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.