7 segment Display - 4 Digit, 0.56" digit height

(No reviews yet) Write a Review
  • White 7 Segment 4 Digit Display 0.56 inch whie
  • Blue 7 Segment 4 Digit Display 0.56 inch blue
  • Green 7 Segment 4 Digit Display 0.56 inch green
  • Yellow 7 Segment 4 Digit Display 0.56 inch yellow
£5.50 - £7.00


7-Segment Clock Display, 4 Digit, 0.56" digit height 4 collour variants! White Blue Green Yellow

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal points on each digit and an extra wire for colon-dots in the center (good for time-based projects).
These are 30mcd bright. You can drive these with less current to get the same brightness to save power, or crank them up to 20mA and have them at their brightest. 560R Resistors will provide good current limiting for a nice brightness at 5V supply.

These displays are multiplexed, common-cathode. What that means it that you can use a 74HC595 or just 8 microcontroller pins if you can spare them to control the 8 anodes (7-seg + decimal) at about ~15mA each, and then connect NPN transistors or a TPIC6B595 to the cathodes to sink the 8*15mA = ~120mA maximum per digit.
We strongly recommend getting a 7-Segment LED Matrix backpack , which is an LED driver that fits on the back of this display. It really simplifies the wiring. 

Clock Display Technical Details

  • This is a Common Cathode LED display
  • Dimensions: 0.76" x 1.9" (19.3mm x 50.3mm) Weight: 8.3g
  • Datasheet


View AllClose

Additional Information

View AllClose