Sparkfun

Nordic Semi nRF52832 Breakout Board (WRL-13990)

(No reviews yet) Write a Review
SKU:
PPWRL-13990
  • Nordic Semi nRF52832 Breakout Board - Sparkfun WRL-13990
  • Nordic Semi nRF52832 Breakout Board - Sparkfun WRL-13990
  • Nordic Semi nRF52832 Breakout Board - Sparkfun WRL-13990
£18.00

Description

Nordic Semi nRF52832 Breakout Board - Sparkfun WRL-13990 Discontinued

The nRF52832 is Nordic Semiconductor’s latest multiprotocol radio System on Chip (SoC). It’s half microcontroller, with a list of features including 32 configurable I/O pins, SPI, I2C, UART, PWM, ADC’s, 512kB flash, and 64kB RAM. And it’s half 2.4GHz multiprotocol radio, supporting Bluetooth Low Energy (BLE), ANT, and half Nordic’s proprietary 2.4GHz ultra-low-power wireless communication – it even features on-chip NFC tag support.
SparkFun’s nRF52832 Breakout provides easy access to all of the chip’s features. It breaks out all of the nRF52’s I/O pins, provides a 32.768kHz RTC crystal, a user-programmable button and LED, and a trace antenna to send and receive those 2.4GHz transmissions. Plus, to make the chip as easy-to-flash as possible, the breakout comes pre-programmed with a serial bootloader.
Nordic’s nRF52832 is an SoC that combines an ARM Cortex-M4F microprocessor with a 2.4GHz multiprotocol radio. In addition to providing access to all of the chip’s I/O pins, the breakout board includes a handful of external components. The nRF52832 can operate on a power supply between 1.7 and 3.6V. The board also includes a 3.3V regulator with a maximum input of 6V, if you want to power the board with batteries or a regulated wall supply.

nRF52832 Features:

  • Bluetooth Low Energy (BLE), ANT and proprietary 2.4GHz radio support
  • 32-bit ARM Cortex-M4F Processor
  • Easy access to all 32 GPIO
  • SPI, I2C, UART, PWM and ADC I/O support
  • User-programmable LED and button
  • 32.768kHz RTC Crystal
  • Pre-programmed serial bootloader
  • Arduino board definition available!

Getting Connected:

To get started with programming this board, we recommend interfacing the breakout board with a SparkFun Beefy 3 - FTDI Basic Breakout. In addition to providing a USB-to-serial programming interface, this board will also be able to fully power the nRF52832 breakout. You'll also want a USB cable!
Also, we recommend fitting a 6-pin header, right angle, straight, male, or female. We have plenty to choose from to make your life easier. This is so that you can connect to the serial interface.

Schematic:

PPWRL-13990 Schematic

Documents:

View AllClose

Additional Information

Brand:
SparkFun
Part Number:
WRL-13990
Barcode:
5055421084578
View AllClose