Sparkfun

Simultaneous RFID Tag Reader, M6E Nano (SEN-14066)

(No reviews yet) Write a Review
SKU:
PPSEN-14066
  • SparkFun Simultaneous RFID Reader - M6E Nano SEN-14066 Main
  • SparkFun Simultaneous RFID Reader - M6E Nano SEN-14066 02 front
  • SparkFun Simultaneous RFID Reader - M6E Nano SEN-14066 03 rear
  • SparkFun Simultaneous RFID Reader - M6E Nano SEN-14066 04
  • SparkFun Simultaneous RFID Reader - M6E Nano SEN-14066 05
  • SparkFun Simultaneous RFID Reader - M6E Nano SEN-14066 06
  • SparkFun Simultaneous RFID Reader - M6E Nano SEN-14066 Main dimension 2
  • SparkFun Simultaneous RFID Reader - M6E Nano SEN-14066 01 dimension 1
£250.00

Description

Simultaneous RFID Tag Reader, M6E Nano - Sparkfun SEN-14066

The SparkFun Simultaneous RFID Tag Reader is an Arduino-compatible board to get you started with the M6E Nano UHF RFID Reader. Radio Frequency Identification (RFID) is becoming popular everywhere for tracking practically everything. Whether you want to get started by adding an RFID reader on your toolbox with tags on all your tools or allowing access to the treehouse for your secret society meetings, this board may be for you!
With the Arduino shield footprint, you can connect this directly to an Arduino-compatible board, or a different microcontroller. You can also connect directly to your computer using the FTDI header on the board and read data using the Universal Reader Assistant.
Once you've started, this board will read EPCglobal Gen 2 tags (see Recommended Products) at up to 150 tags per second. Writing of tags is also possible at 80msec standard write. The board has an adjustable power output from 0dBm to 27dBm, meaning that with the correct antenna you can read up to 16 feet (4.9m), or 1 to 2 feet with the onboard antenna.

Simultaneous RFID Reader Features:

  • EPCglobal Gen 2 (ISO 18000-6C) with nominal backscatter rate of 250kbps
  • Separate read and write levels, command adjustable from 0dBm to 27dBm in 0.01 dB steps
  • 0.84W in ready mode
  • 0.00025W in shutdown mode
  • Up to 150 tags/sec to read 96-bit EPC
  • 80msec typical for standard write of 96-bit EPC

Documents:

Notes:

  • Your readerships with a piece of gray, nonconductive Thermal Gap Filler to help with both heat dissipation and to cover the exposed ground plane (to prevent circuits from shorting against it).

Warnings:

  • Ensure that personnel does not stand in the radiation beam of the antenna unless they are more than 21cm away from the face of the antenna (to adhere to FCC limits for long-term exposure). See Datasheet for more information.
View AllClose

Additional Information

Brand:
SparkFun
Part Number:
SEN-14066
Barcode:
845156007820
View AllClose